| Aspen Aerogels® manufactures thermal insulation for flowlines. Our insulations provide the most insulating value for any passive thermal solution. Features include:
— Easy to install
— Water resistant
— Radiation reflective
— Excellent long term thermal performance
this will be replaced by the SWF.
Click any image to enlarge
Our insulations can be used directly on the pipe in a PIP (pipe in pipe configuration) or in combination with other materials in a PIP or single pipe (PP, GSPU) to provide higher insulation and temperature performance.
Our technical teams work directly with the Operator, Engineering, or Installation contractor to determine the right solution for every case.
MORE INFORMATION:
Project list
Papers & Presentations
Offshore pipe-in-pipe solutions
Diagram: PIP with aerogel insulation
Diagram: Aerogel with heat shield
Diagram: Subsea design challenge
Request Quote/Info
To speak to a technical expert, please call
514-487-8693.
|
| |
Spaceloft® Subsea Flexible Insulation for Subsea Pipelines |
For moderate temperature use: -148°F (-100°C) to 392°F (200°C)
Thickness: 0.20 in (5 mm)
|
Data Sheet
Data Sheet-French
MSDS
MSDS-French
|
Spaceloft® Subsea insulation, due to its very low thermal conductivity, is used for thermal insulation for pipe in pipe (PIP) applications in the major offshore sectors. Customers can request almost any desired thickness to suit their pipeline thermal goals. The insulation is ideal for very hot pipelines as well as cooler pipelines that can sometimes be found in deep fields. Spaceloft® Subsea insulation has the ability to minimize heat loss for extremely long tiebacks. It is manually installed in a continuous process and, because it is flexible, can be easily tailored on site if required. Spaceloft® Subsea insulation is provided prepackaged ready for use or in roll format for later processing.
|
|
| |
Cryogel® Z Flexible Insulation for Subsea Pipelines |
For moderate temperature use: -148°F (-100°C) to 350°F (177°C)
Thicknesses: 0.20 in (5 mm), 0.40 in (10 mm)
|
Brochure
Data Sheet
Data Sheet-French
Data Sheet-Spanish
MSDS
MSDS-French
MSDS-Span
|
Cryogel® Z is a new thermal insulation for pipe in pipe (PIP) applications. It is economically produced in standard thicknesses and can be installed by manually or by automation. The insulation comes with its own radiation reflection per ply, allowing multiple levels of radiation isolation combined with the low thermal conductivity of aerogel performance. Cryogel® Z insulation can be very easily trimmed on site using a hot knife. It is available in rolls for roll wrapping or produced in blankets for traditional manual installation. The fiber reinforced thermal insulation can be used on large surfaces or on pipelines that require insulation strength. |
|
| |
Pyrogel® XTF Flexible Insulation for Subsea Field Joints |
For moderate to high temperatures: -40°F (-40°C) to 1200°F (650°C)
Thicknesses: 0.20 in (5 mm), 0.40 in (10 mm)
|
Data Sheet
Data Sheet-French
MSDS
MSDS-French
|
Pyrogel® XTF insulation is used for a wide range of industrial applications including refineries, petrochemical, and gas processing when fire or flame is present. Pyrogel® XTF is the most effective high-temperature insulation material in the industrial market, typically 2-5 times thinner than competing products. Pyrogel® XTF insulation is efficient, durable, and more productive to install. It is produced in roll form or precut into rectangular sheets for quick installation for field joints. |
|
|
